View Single Post
Old 05-19-2019, 04:54 PM   #5
tomasss
Board Member
 
tomasss's Avatar
 
Join Date: Oct 2008
Location: Leuven, Belgium
Default

Quote:
Originally Posted by sbabbs View Post
Pretty sure the step height is spec'd at 25.0mm.
Ok. That means my flywheel is the correct one.
Quote:
Originally Posted by sbabbs View Post
Easiest fix would be to put 0.5mm washers between pressure plate and flywheel for each of the bolts.
But I am not missing 0.5mm. I am missing almost 5mm (see the numbers and pics above).
__________________
Volvo 740 Turbo B204GT 1991 >project thread<
It's the oversteer that scares passengers. It's the understeer that scares the driver.
Quote:
Originally Posted by Wren View Post
I would rather push a 240 than drive a V70.
lazy PRV engine? Check >this< out
tomasss is offline   Reply With Quote