Got the motor torn down and there is diffidently shows some damage so it is tie to rebuild after to measuring to find out if there is any damage to the crank or anything.
Top end with the valve cover off
Head off
The oil that came out, looks not great and a fair amount of metal
Crankshaft, looks ok I think, need to measure it to make sure, tips are welcome
Piston 1 rod and bearing
Piston 2 rod and bearing
Piston 3 rod and bearing
Piston 4 rod and bearing
Oil pump tube, Here is where the real damage no clue how this happened
So any input would be awesome I am assuming it was poor assembly by me followed by all the fuel in the oil so I think a rebuild will fix it