View Single Post
Old 04-14-2016, 10:35 AM   #8
Janspeed
Board Member
 
Join Date: Sep 2005
Default

a cable pull-type clutch has the pivot bolt on the other side of the bellhouse.
a hydraulic type clutch has the pivot bolt on the side of the bellhouse where the clutch fork hole is located.
If you want to use OEM Volvo parts (pusher slave cilinder) you need to switch to the appropriate clutch fork and switch the pivot bolt to the appropriate location.
Or like cwdodson88 proposed, get a pull type slave cilinder.
Janspeed is offline   Reply With Quote