• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

960 power seat connections

dl242gt

The world of the smiling Dogo
Joined
Jun 21, 2002
Location
S NJ, a suburb of Phila.
I am troubleshooting a lack of power seat operation. My friend swapped power seats into
his 88 740 turbo from a 960. We connected the red and black wires to power and ground
respectively and the drives seat works fine. I connected the same wires on the passenger
seat and it does not operated. I see there is a orange wire in the diagram that needs to be connected but I can't tell if it gets connected to ground or power. The orange wire seems to go to the STOP button on the seat controls. Any help would be appreciated.
 
Pretty sure you need to connect the orange wire to power. It looks like there's a relay connected to the stop switch that cuts power to all the other switches.
 
Back
Top