home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 05-07-2021, 04:33 PM   #1
Pietercc
Board Member
 
Join Date: Apr 2019
Location: 245/90
Default Aq131 rods in standard b230

Quick question, I've got rods out of an aq131, which are shorter than the standard rods, and use a different crank. If i throw the shorter rods on a standard crank that should lower compression, then more boost could be thrown at it right? Or should I grab the crank from the aq131 as well?
Pietercc is offline   Reply With Quote
Old 05-07-2021, 09:16 PM   #2
dl242gt
Happy playing the blues
 
dl242gt's Avatar
 
Join Date: Jun 2002
Location: S NJ, a suburb of Phila.
Default

What version of automotive engine is the AQ131 based on? If the engine is based on the earlier B21/B23 design the rods are shorter in those engines than a B230 based engine would be. They don't interchange.
__________________
Dave,
1982 242 turbo. 338k miles. MVP coilovers and 3" exhaust. Flowed 405 with a V15. Cossie turbine housing with upgraded compressor housing. 90+, IPD remote oil filter. Some other goodness, too. Been lots of fun over 25 years. Restored in 2k. Now ready for a 2nd restoration.

1993 245 Classic, 430k miles, enem V15. IPD bars and chassis braces. Simons sport exhaust from Scandix. sbabbs ezk chip. Been a good road warrior. Genuine Volvo rebuilt leaky M47.
dl242gt is offline   Reply With Quote
Old 05-07-2021, 10:19 PM   #3
hiperfauto
The Librarian
 
hiperfauto's Avatar
 
Join Date: Nov 2011
Location: So Cal
Default

As near as I can tell from the online Penta catalogs it's just a B230 and uses standard rods. Even if it were a stroker crank they use the same rods and just change the pin location on the piston.
hiperfauto is offline   Reply With Quote
Old 05-08-2021, 08:52 AM   #4
mikep
The MP
 
mikep's Avatar
 
Join Date: May 2003
Location: 38° 27' N 75° 29' W
Default

If you lower the piston in the hole you lose any quench (the outer area on top where it almost hits the head, creating shock waves). No good. You want those shock waves to create turbulence and promote a good burn. The B series heads are bad enough, don't make your situation worse. I almost always try to bring the piston out of the hole with a thicker (.040") gasket. Piston to head clearance varies by diameter and opinion, btw.
__________________
Quote:
Originally Posted by Bready View Post
Fun fact - bats having an extraordinary appreciation for sound and frequency are well known fans of Bose 901s and I have a feeling that's why it came into the house to begin with, it definitely stayed in the "sweet spot" throughout the visit...
mikep is offline   Reply With Quote
Old 05-08-2021, 10:13 PM   #5
gsellstr
Vintage anti-ricer
 
gsellstr's Avatar
 
Join Date: Oct 2004
Location: Somewhere in a northern California smog bank
Default

The AQ131 is just a stock B230. The 151 is the 86mm 8v, the 171 is the 86mm 16v.
__________________
RIP
Doug Williams "Mr. Doug" 4/15/2009
Pete Fluitman "fivehundred" 7/14/2013
Mick Starkey "TrickMick" 1/10/14
Mark Baldwin "blue850t5" 7/19/18
Nick Fengler "fengler" 8/6/18
Thomas Fritz "stealthfti" 10/11/18


74 144 B20
http://forums.turbobricks.com/showthread.php?t=224983

90 745Ti
http://forums.turbobricks.com/showthread.php?t=334698

If you need Superpro bushings PM me for price and availability!
gsellstr is offline   Reply With Quote
Old 05-14-2021, 06:33 PM   #6
turbomant5
Board Member
 
Join Date: Feb 2018
Location: lake havasu city az
Default

the aq131 uses the same rods as an automotive b230. the stroked versions of the aq engine family were the aq151 and aq171 they use the same rods with a different crank throw and shorter pistons.
turbomant5 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 04:55 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.