home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 01-10-2020, 01:46 PM   #1
Turbo3er
Board Member
 
Join Date: Aug 2006
Location: Mobile, AL
Default 240 Differential/Rearend width?

Does one of you happen to know the stock width of a 240 rearend from axle hub face to axle hub face, and from bearing housing end to bearing housing end?
__________________
2016 Dodge Challenger R/T Scatpack
2006 Chrysler 300C
1999 Dodge Ram 2500 Cummins
1987 BMW 325 PnP MSnS w/HEEBSPEED Tune
2008 H-D VRSCDX V-Rod 11.867 @ 113.86

The Departed
2009 Dodge Ram 3500
Turbo3er is offline   Reply With Quote
Old 01-10-2020, 04:07 PM   #2
culberro
Ronald Culberbone III
 
culberro's Avatar
 
Join Date: Feb 2010
Location: Portland, OR
Default

Quote:
Originally Posted by Turbo3er View Post
Does one of you happen to know the stock width of a 240 rearend from axle hub face to axle hub face, and from bearing housing end to bearing housing end?
Flange to Flange is ~54-3/4", I think.
__________________
Cult Person. Pissing in your Kool-Aid.
culberro is offline   Reply With Quote
Old 01-10-2020, 08:40 PM   #3
Turbo3er
Board Member
 
Join Date: Aug 2006
Location: Mobile, AL
Default

Quote:
Originally Posted by culberro View Post
Flange to Flange is ~54-3/4", I think.
axle flange to axle flange or bearing flange to bearing flange?
Turbo3er is offline   Reply With Quote
Old 01-10-2020, 11:01 PM   #4
culberro
Ronald Culberbone III
 
culberro's Avatar
 
Join Date: Feb 2010
Location: Portland, OR
Default

Hub mounting surface
culberro is offline   Reply With Quote
Old 01-10-2020, 11:10 PM   #5
Redwood Chair
K-jet For Life
 
Redwood Chair's Avatar
 
Join Date: Mar 2007
Location: - Stock PSI Or Bust -
Default

Rear track is 1350mm minus 20 + 20 = 40 for wheel offset I get 1310mm or 51.57".
__________________
Raise The Lowered


Image hosted by servimg.com

Quote:
Originally Posted by hiperfauto View Post
Folks on here don't know a good deal when they see it.
how psi stock cna support?

Redwood Chair is offline   Reply With Quote
Old 01-11-2020, 05:12 AM   #6
culberro
Ronald Culberbone III
 
culberro's Avatar
 
Join Date: Feb 2010
Location: Portland, OR
Default

Should be plus 40mm, no?
culberro is offline   Reply With Quote
Old 01-12-2020, 03:26 PM   #7
Redwood Chair
K-jet For Life
 
Redwood Chair's Avatar
 
Join Date: Mar 2007
Location: - Stock PSI Or Bust -
Default

Quote:
Originally Posted by culberro View Post
Should be plus 40mm, no?
You're right my bad it's negative offset so add 40mm.

Which puts it back to 57.72" with the thickness of the rotor flanges.
Redwood Chair is offline   Reply With Quote
Old 01-12-2020, 05:55 PM   #8
culberro
Ronald Culberbone III
 
culberro's Avatar
 
Join Date: Feb 2010
Location: Portland, OR
Default

Quote:
Originally Posted by redwood chair View Post
which puts it back to 57.72" with the thickness of the rotor flanges.
54.72”
culberro is offline   Reply With Quote
Old 01-15-2020, 12:32 PM   #9
RolinOldies
Board Member
 
Join Date: Jul 2010
Location: Belgium
Default

Track = 53.54 inch (from spec's)
Hub to hub = 1400 mm. (calculated from spec's and measurment confirmed)

edit: hub to hub meaning mounting flange on the rotors where the rims rest.
edit2:
I see there's different info on the track, 1350/1360,
I got 1360 documented and measured, and documented 1350 with a '?'
could be that the diesel models had a slightly different track.
https://www.autoevolution.com/cars/v...vo-245-1980-20
https://www.carfolio.com/specificati...ar/?car=227238

Last edited by RolinOldies; 01-15-2020 at 12:58 PM..
RolinOldies is offline   Reply With Quote
Old 02-07-2020, 12:10 PM   #10
Redwood Chair
K-jet For Life
 
Redwood Chair's Avatar
 
Join Date: Mar 2007
Location: - Stock PSI Or Bust -
Default

Quote:
Originally Posted by RolinOldies View Post
Track = 53.54 inch (from spec's)
Hub to hub = 1400 mm. (calculated from spec's and measurment confirmed)

edit: hub to hub meaning mounting flange on the rotors where the rims rest.
edit2:
I see there's different info on the track, 1350/1360,
I got 1360 documented and measured, and documented 1350 with a '?'
could be that the diesel models had a slightly different track.
https://www.autoevolution.com/cars/v...vo-245-1980-20
https://www.carfolio.com/specificati...ar/?car=227238
Early 240 steel wheels are 25et.
Redwood Chair is offline   Reply With Quote
Old 02-08-2020, 08:50 AM   #11
OttoB
Board Member
 
Join Date: Aug 2006
Location: E(Seattle!Vancouver! San Francisco!LA!) Helsinski
Default

From internet, so take with a cuppa tee

140 = 1416 mm
240= 1383 mm
740 = 1500 mm (about)

These are flange to flange, brake discs included.

Does anybody have 1800ES measurements?
OttoB is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 03:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.